973 found, showing page 1 of 65
Nibco T00050D Pipe Coupling, 3/4 x 1/2 in, CPVC, SCH 40 Schedule
PRODUCT OVERVIEW
Nibco Reducing Pipe Coupling, Nominal Size: 3/4 x 1/2 in, Slip Connection, Operating Temperature: 180 deg F, Schedule Rating: SCH 40, CPVC x CTS
Product Details
Connection Type:Slip
Material:CPVC x CTS
Nominal Size:3/4 x 1/2 in
Operating Temperature:180 deg F
Schedule Rating:SCH 40
View Details
$0.59
Elkhart Products 10156858 Pipe Elbow, 3/4 in, Compression x Female, 90 deg Angle, Brass
PRODUCT OVERVIEW
Elkhart Products Pipe Elbow, Nominal Size: 3/4 in, Sweat x Female Connection, Angle: 90 deg, Brass
Product Details
Angle:90 deg
Connection Type:Sweat x Female
Material:Brass
Nominal Size:3/4 in
View Details
$13.99
Watts 35 Series 3501-0808/P-412 Connector, 3/8 x 1/2 in, CTS x NPT x Male, Polysulfide, 250 psi Pres
PRODUCT OVERVIEW
Watts(R) quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts(R) quick-connect design allows for quick and easy connections without the use of installation
tools.
Product Details
Connection Type:CTS x NPT x Male
Length:2 in
Material:Polysulfide
Nominal Size:3/8 x 1/2 in
Operating Temperature:75 deg F
Pressure Rating:250 psi
View Details
$3.99
Lasco 205360BC Pipe Nipple, 1/2 in, PVC, SCH 80 Schedule, 36 in L
PRODUCT OVERVIEW
Lasco Pipe Nipple, Nominal Size: 1/2 in, Schedule Rating: SCH 80, PVC, 36 in L
Product Details
Length:36
Material:PVC
Nominal Size:1/2 in
Schedule Rating:SCH 80
View Details
$7.99
Oatey Sure-Vent 39016 Air Admittance Valve, NPT, PVC
PRODUCT OVERVIEW
The purpose of an air admittance valve is to provide a method of allowing air to enter the plumbing drainage system without the use of a vent extended to open air and to prevent sewer gases from escaping into a building. An air admittance valve is a one-way valve designed to allow air to enter the plumbing drainage system when negative pressures develop in the piping system. The device shall close by gravity and seal the vent terminal at zero differential pressure (no flow conditions) and under positive internal pressures.
Product Details
Connection Type:NPT
Material:PVC
Temperature Rating:-40 to 150 deg F
Features
Rated 20 DFU's for venting DWV 2 in and smaller
Sweet Spot(TM) technology opens at -0.01 psi and seals at 0 psi and above Screening on air inlets to guard the seal
Protective rubber sleeve provides grip for installation and keeps valve free from debris
100% functionally tested at 1/4 in H2O and 30 in H2O ensuring trouble-free performance
For use as a secondary vent
One-size approved to handle up to 3 in vent pipe
View Details
$32.99
Watts P-840/3523-14 Union Pipe Tee, 3/4 in, Sweat Push-Fit, Plastic, White, 100 psi Pressure
PRODUCT OVERVIEW
Connection shall be made using Watts(R) series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect.
Product Details
Color:White
Connection Type:Sweat Push-Fit
Material:Plastic
Nominal Size:3/4 in
Operating Temperature:180 deg F
Pressure Rating:100 psi
Suitable for:PEX Copper CPVC and Potable Plumbing Pipes
Features
Watts(R) quick-connect design allows for quick and easy connections without the use of installation tools
View Details
$8.69
SharkBite U340LFA Tube to Pipe Elbow, 3/4 in, 90 deg Angle, Brass, 200 psi Pressure
Description
Sharkbite 3/4in x 3/4in FNPT 90 Deg Angle Push Drop Ear Elbow
Make a 90 Deg connection and transition to a threaded pipe. Has mounting ears with holes for securing to a support surface. Typically used for installing shower arms and tub spouts. Innovative push-to-connect design makes for quick and easy installation. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
Features
Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe
No special tools, crimping, glue or soldering required
Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
Remove using a Disconnect Clip or Disconnect Tongs (both sold separately) Rated for 200 Psi and 200 Deg F (93 Deg C)
View Details
$13.99
Sharkbite 3/4 x 1/2 x 3/4in Push to Connect Brass Reducing Tee
Description
Sharkbite 3/4 x 1/2 x 3/4in Push to Connect Brass Reducing Tee
Innovative push-to-connect design makes for quick and easy installation when joining different size pipe. Ideal for working in tight spaces. Faster install time and ease of use reduces installation errors.
Features
Compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination
No special tools, crimping, glue or soldering required
Can be installed in wet lines
Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground)
Can be rotated after assembly for easier and faster installation
Remove using a Disconnect Clip or Disconnect Tongs (both sold separately) Rated for 200 Psi and 200 Deg F (93 Deg C)
View Details
$15.99
IPEX 435657 Reducing Bushing, 2 x 1/2 in, Spigot x Socket, White, SCH 40 Schedule, 150 psi Pressure
PRODUCT OVERVIEW
Bushings are used to reduce the size of pipe connecting to a fitting. This one is solvent welded to a fitting socket and a smaller size pipe.
Product Details
Color:White
Connection Type:Spigot x Socket
Length:3 in
Nominal Size:2 x 1/2 in
Operating Temperature:140 deg F
Pressure Rating:150 psi
Schedule Rating:SCH 40
Suitable for:Plant Chemical Distribution Lines Water and Wastewater Treatment Battery Manufacturing and Pharmaceutical
View Details
$2.29
Elkhart Products 31120 Pipe Elbow, 1 in, Sweat, 45 deg Angle, Copper
PRODUCT OVERVIEW
Elkhart Products 106 Pipe Elbow, Nominal Size: 1 in, Sweat Connection, Angle: 45 deg, Copper
Product Details
Angle:45 deg
Connection Type:Sweat
Material:Copper
Nominal Size:1 in
Operating Temperature:-20 to 400 deg F
Pressure Rating:494 psi
View Details
$12.99
IPEX 435517 Pipe Elbow, 1 x 3/4 in, Slip x MPT, 90 deg Angle, PVC, White, SCH 40 Schedule, 450 psi P
PRODUCT OVERVIEW
IPEX Pipe Elbow, 1 x 3/4 in Nominal, Slip x MPT Connection, 90 deg Angle, 450 psi Pressure, 140 deg F Operating, SCH 40 Schedule, PVC, White
Product Details
Angle:90 deg
Color:White
Connection Type:Slip x MPT
Material:PVC
Nominal Size:1 x 3/4 in
Operating Temperature:140 deg F
Pressure Rating:450 psi
Schedule Rating:SCH 40
View Details
$2.99
Nibco W01870D Pipe Cap, 1 in, Sweat, Copper, 494 psi Pressure
PRODUCT OVERVIEW
Nibco Pipe Cap, 1 in Nominal, Sweat Connection, 494 psi Pressure, -20 deg F Operating, Copper, Suitable for: Brass, Bronze and Copper Pipes
Product Details
Connection Type:Sweat
Material:Copper
Nominal Size:1 in
Operating Temperature:-20 deg F
Pressure Rating:494 psi
Suitable for:Brass Bronze and Copper Pipes
View Details
$4.29
Watts 35 Series 3501-1012 Connector, 1/2 x 3/4 in, CTS x NPT x Male, Polysulfide, 250 psi Pressure
PRODUCT OVERVIEW
Watts(R) quick-connect connectors are designed and manufactured for many years of trouble-free service. Produced of off-white polysulfone, a high-performance thermal plastic material, the Watts(R) quick-connect design allows for quick and easy connections without the use of installation
tools.
Product Details
Connection Type:CTS x NPT x Male
Length:2-1/8 in
Material:Polysulfide
Nominal Size:1/2 x 3/4 in
Operating Temperature:75 deg F
Pressure Rating:250 psi
View Details
$6.49
Watts 3520-0808/P-436 Swivel Pipe Elbow, 3/8 x 1/2 in, 90 deg Angle, Plastic, Off-White, 100 psi Pre
PRODUCT OVERVIEW
This 3/8 in x 1/2 in plastic quick-connect elbow incorporates stainless steel gripping teeth in the collets. These corrosion-resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools or tube inserts. It works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing.
Product Details
Angle:90 deg
Color:Off-White
Material:Plastic
Nominal Size:3/8 x 1/2 in
Operating Temperature:180 deg F
Pressure Rating:100 psi
Suitable for:Copper CPVC HDPE LPDE MPDE PEX and Polybutylene Tube
Features
No tools necessary for installation or removal
Higher flow compared to barb fittings, no internal restrictions
Rotates under pressure
Connects to multiple materials
View Details
$6.99
Watts 3515R-1008/P-602 Tube Coupling, 1/2 x 3/8 in, Plastic, 250 psi Pressure
PRODUCT OVERVIEW
Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged.
Product Details
Material:Plastic
Nominal Size:1/2 x 3/8 in
Operating Temperature:75 deg F
Pressure Rating:250 psi
Suitable for:Copper CPVC PEX and Potable Plumbing Pipes
View Details
$8.69
